ODM OEM Heavy Duty Rigid Coupling 500psi Factories Pricelist – Angle-Pad Coupling 300Psi – DIKAI
ODM OEM Heavy Duty Rigid Coupling 500psi Factories Pricelist – Angle-Pad Coupling 300Psi – DIKAI Detail:
Style 1X Angle pad rigid Coupling
1.Product introduction:
an angle-pad design rigid coupling for moderate pressure piping services including fire mains, long straight runs and valve connections. The angle-pad design allows the coupling housings to slide along the bolt pads when tightened. The result is an offset clamping action which provides a rigid joint which resists so-called ‘snaking’ of a long straight run. Support and hanging requirements correspond to ANSI B31.1, B31.9 and NFPA 13.With the removal of only one bolt you can make a fast and easy ‘swing-over’ installation The angle pad design allows for fast and easy swing-over installation with the removal of a single bolt.
The Angle-pad coupling design standard rigid coupling for the general piping application where rigidity is required including value connections,mechanical rooms,fire mains and long straight runs.The angle-pad design allows the coupling housings to slide along the bolt pads when tightened.The result is an offset clamping action which provides a rigid joint that resists flexural and torsional loads.Support and hanging requirements correspond to ANSI B31.1,B31/9 and NFPA 13.
•Model 1X Angle pad rigid coupling
•This rigid coupling allows for more accurate positioning of the tube end,forming a fixed tube end separation,which should be considered in the design and installation.
•Enhanced body resits 4 times working pressure.
2.Product size(Specification)
3.Product Feature And Application
Housing material:Ductile iron conforming to ASTM A-536,grade 65-45-12
•FM Approved & UL Listed:R.W.P.rated working pressure 300PSI(2.065 Mpa/20.65 bars)
•Housing Finish:Fusion Bonded Epoxy Coated(Optional:Hot Deep Galvanized and Others)
Coupling gasket material:EPDM(Optional:Nitrile NBR,Silicone and others)
•In addition to the points listed in this table,but also according to customer requirements to provide a variety of special point of the elbow.
•Size Range:DN25 through DN3000 (1’’ through 12’’)
4.Product Qualification
5.Deliver,Shipping And Serving
Ship from Tianjin or another Seaports
Product detail pictures:
Related Product Guide:
We normally believe that one's character decides products' quality, the details decides products' high-quality ,while using the REALISTIC,EFFICIENT AND INNOVATIVE staff spirit for ODM OEM Heavy Duty Rigid Coupling 500psi Factories Pricelist – Angle-Pad Coupling 300Psi – DIKAI , The product will supply to all over the world, such as: Rio de Janeiro, Riyadh, California, Immediate and expert after-sale service supplied by our consultant group has happy our buyers. Comprehensive Info and parameters from the merchandise will probably be sent to you for any comprehensive acknowledge. Free samples may be delivered and company check out to our corporation. n Morocco for negotiation is constantly welcome. Hope to get inquiries type you and construct a long-term co-operation partnership.
By Martina from Montpellier - 2018.02.08 16:45
The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.
By Penny from Madagascar - 2018.10.01 14:14